{"title":"Reloading \u003e Reloading Dies \u0026 Accessories","description":"","products":[{"product_id":"micron-precision-series-338-lapua-bushing-sizer-die","title":"Micron Precision Micron Precision Series Bushing Sizing Die 338 Lapua","description":"\u003cp\u003e\u003cstrong\u003eMicron Precision Die Series by Bullet Central.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eAfter over 40 years of rifle competition, and having used resizing dies from many manufacturers. Bullet Central has found that most commercially available dies will not let you take full advantage of the potential of reloading for accuracy.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon problems that constantly frustrate shooters are:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eOver or under-sizing brass cases cause \"clicking\" on extraction, catastrophic case failure, work-hardening your brass, and ultimately unnecessarily shortened life.\u003c\/li\u003e\n\u003cli\u003ePoor manufacturing processes result in case concentricity issues. It is rare to find a die that will size brass straight. This is essential for concentric bullet contact in the throat of the chamber.\u003c\/li\u003e\n\u003cli\u003eBushing dies that don't allow full sizing of the neck. In some cases, partial neck sizing is desirable, but with the Micron Series, you can at least customize this aspect.\u003c\/li\u003e\n\u003cli\u003eDie chambers are not concentric with the threads and, therefore, the press ram.\u003c\/li\u003e\n\u003cli\u003eLock rings are not square to the die threads, resulting in misalignment to the press.\u003c\/li\u003e\n\u003cli\u003eThe internal surface of the die chamber is poorly finished, causing scratches on the brass.\u003c\/li\u003e\n\u003cli\u003eOften, the reamers used to make the dies are outside specification relative to the chamber dimensions, resulting in improper forming of the sized brass.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eHistory in Die Making\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBullet Central has made sizing dies for several years, which are used by the most particular shooting professionals worldwide. With the Micron Series, they decided to redesign the dies and make them 100% in-house to their specifications. To this end, they have invested significantly in state-of-the-art machinery that will allow them to control the process from beginning to end, bringing you what they believe is a sizing die without equal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Micron Precision Die Series Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eCustom-sized die bodies for each caliber. They do not believe in a one-size-fits-all approach. This allows for the sizing of the entire neck if desired. The reloader can also choose a die cap that will allow for partial neck sizing if needed.\u003c\/li\u003e\n\u003cli\u003eTheir CNC machinery and processes allow for the industry's highest level of straightness and precision.\u003c\/li\u003e\n\u003cli\u003eA brand new Die-Loc lock-ring system that allows for two perfectly machined rings to come together and hold the die perpendicular to the top of the press and not be misaligned, as often is the case with a single lock ring.\u003c\/li\u003e\n\u003cli\u003eAfter all the CNC processes, every Micron Precision Die is finished by hand, inspected, and sent out for nitride hardening. Once hardened, the dies are individually polished and checked again before being ready for sale.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eIn conclusion, these dies are proven by the world's best rifle competitors. From Benchrest to Barricades, your investment in a Micron Precision Die will give you the peace of mind that your brass is cared for after each firing. One of the most essential items in your reloading setup is your sizing die.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdditional Die Information\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eThey are designed to size the entire case body up to the 0.200\" line based on SAAMI \u0026amp; CIP standard chamber dimensions. Case springback is factored into the amount the die resizes, using customized sizes for every cartridge. This is a different but more consistent method than sending in fired brass to have a die made.\u003c\/li\u003e\n\u003cli\u003eThe shoulder bump is adjusted by moving the die up or down in the press; Bullet Central does not recommend bottoming out the die on a shell holder and using a standard bump number! Since a reamer is used to cut the die chamber, the angles on the shoulder neck \u0026amp; body junctions will match the SAAMI \u0026amp; CIP designated angles, giving that brass a tighter unimpeded chamber fit.\u003c\/li\u003e\n\u003cli\u003eNecks are sized using a 0.5\" standard neck bushing (they recommend their bushing because it is as straight as they get); this allows you to tune neck tension to achieve the best possible accuracy. Bushings also allow the sizing die to be used for necked-down cases using the appropriate bushing. The bushing retainer cap is designed to keep the bushing parallel to the die body to help achieve the straightest possible necks.\u003c\/li\u003e\n\u003cli\u003eThe sizer dies body is cut, threaded, and reamed all in one operation which almost eliminates runout or out of spec die chambers. The body being made as one solid part avoids any fitment issue or added concentricity problems found with dies that have interchangeable parts. (Keep it simple! The fewer parts involved the better!)\u003c\/li\u003e\n\u003cli\u003eThe die body is hand polished and nitrided to protect the surface and add lubricity to the chamber of the die.\u003c\/li\u003e\n\u003cli\u003eA brand new Die-Loc lock-ring system that allows for two perfectly machined rings to come together and hold the die perpendicular to the top of the press and not be misaligned as often is the case with a single lock ring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eAnatomy Of the Die\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cp\u003eSee the Second picture, a diagram showing you a cros-section of the die. Notice how the chamber opens up at the shoulder to accommodate different bushing sizes. This design allows for you to \"neck down\" cases of similar calibers.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Micron Precision","offers":[{"title":"Default Title","offer_id":46445104365699,"sku":"BLCREMS0473","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/121829.jpg?v=1772033793"},{"product_id":"micron-precision-series-22-250-remington-bushing-sizer-die","title":"Micron Precision Micron Precision Series Bushing Sizing Die 22-250 Remington","description":"\u003cp\u003e\u003cstrong\u003eMicron Precision Die Series by Bullet Central.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eAfter over 40 years of rifle competition, and having used resizing dies from many manufacturers. Bullet Central has found that most commercially available dies will not let you take full advantage of the potential of reloading for accuracy.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon problems that constantly frustrate shooters are:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eOver or under-sizing brass cases cause \"clicking\" on extraction, catastrophic case failure, work-hardening your brass, and ultimately unnecessarily shortened life.\u003c\/li\u003e\n\u003cli\u003ePoor manufacturing processes result in case concentricity issues. It is rare to find a die that will size brass straight. This is essential for concentric bullet contact in the throat of the chamber.\u003c\/li\u003e\n\u003cli\u003eBushing dies that don't allow full sizing of the neck. In some cases, partial neck sizing is desirable, but with the Micron Series, you can at least customize this aspect.\u003c\/li\u003e\n\u003cli\u003eDie chambers are not concentric with the threads and, therefore, the press ram.\u003c\/li\u003e\n\u003cli\u003eLock rings are not square to the die threads, resulting in misalignment to the press.\u003c\/li\u003e\n\u003cli\u003eThe internal surface of the die chamber is poorly finished, causing scratches on the brass.\u003c\/li\u003e\n\u003cli\u003eOften, the reamers used to make the dies are outside specification relative to the chamber dimensions, resulting in improper forming of the sized brass.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eHistory in Die Making\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBullet Central has made sizing dies for several years, which are used by the most particular shooting professionals worldwide. With the Micron Series, they decided to redesign the dies and make them 100% in-house to their specifications. To this end, they have invested significantly in state-of-the-art machinery that will allow them to control the process from beginning to end, bringing you what they believe is a sizing die without equal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Micron Precision Die Series Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eCustom-sized die bodies for each caliber. They do not believe in a one-size-fits-all approach. This allows for the sizing of the entire neck if desired. The reloader can also choose a die cap that will allow for partial neck sizing if needed.\u003c\/li\u003e\n\u003cli\u003eTheir CNC machinery and processes allow for the industry's highest level of straightness and precision.\u003c\/li\u003e\n\u003cli\u003eA brand new Die-Loc lock-ring system that allows for two perfectly machined rings to come together and hold the die perpendicular to the top of the press and not be misaligned, as often is the case with a single lock ring.\u003c\/li\u003e\n\u003cli\u003eAfter all the CNC processes, every Micron Precision Die is finished by hand, inspected, and sent out for nitride hardening. Once hardened, the dies are individually polished and checked again before being ready for sale.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eIn conclusion, these dies are proven by the world's best rifle competitors. From Benchrest to Barricades, your investment in a Micron Precision Die will give you the peace of mind that your brass is cared for after each firing. One of the most essential items in your reloading setup is your sizing die.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdditional Die Information\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eThey are designed to size the entire case body up to the 0.200\" line based on SAAMI \u0026amp; CIP standard chamber dimensions. Case springback is factored into the amount the die resizes, using customized sizes for every cartridge. This is a different but more consistent method than sending in fired brass to have a die made.\u003c\/li\u003e\n\u003cli\u003eThe shoulder bump is adjusted by moving the die up or down in the press; Bullet Central does not recommend bottoming out the die on a shell holder and using a standard bump number! Since a reamer is used to cut the die chamber, the angles on the shoulder neck \u0026amp; body junctions will match the SAAMI \u0026amp; CIP designated angles, giving that brass a tighter unimpeded chamber fit.\u003c\/li\u003e\n\u003cli\u003eNecks are sized using a 0.5\" standard neck bushing (they recommend their bushing because it is as straight as they get); this allows you to tune neck tension to achieve the best possible accuracy. Bushings also allow the sizing die to be used for necked-down cases using the appropriate bushing. The bushing retainer cap is designed to keep the bushing parallel to the die body to help achieve the straightest possible necks.\u003c\/li\u003e\n\u003cli\u003eThe sizer dies body is cut, threaded, and reamed all in one operation which almost eliminates runout or out of spec die chambers. The body being made as one solid part avoids any fitment issue or added concentricity problems found with dies that have interchangeable parts. (Keep it simple! The fewer parts involved the better!)\u003c\/li\u003e\n\u003cli\u003eThe die body is hand polished and nitrided to protect the surface and add lubricity to the chamber of the die.\u003c\/li\u003e\n\u003cli\u003eA brand new Die-Loc lock-ring system that allows for two perfectly machined rings to come together and hold the die perpendicular to the top of the press and not be misaligned as often is the case with a single lock ring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eAnatomy Of the Die\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cp\u003eSee the Second picture, a diagram showing you a cros-section of the die. Notice how the chamber opens up at the shoulder to accommodate different bushing sizes. This design allows for you to \"neck down\" cases of similar calibers.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Micron Precision","offers":[{"title":"Default Title","offer_id":46445105086595,"sku":"BLCREMS0461","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/121831.jpg?v=1772033794"},{"product_id":"micron-precision-series-300-wsm-bushing-sizer-die","title":"Micron Precision Micron Precision Series Bushing Sizing Die 300 WSM","description":"\u003cp\u003e\u003cstrong\u003eMicron Precision Die Series by Bullet Central.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eAfter over 40 years of rifle competition, and having used resizing dies from many manufacturers. Bullet Central has found that most commercially available dies will not let you take full advantage of the potential of reloading for accuracy.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon problems that constantly frustrate shooters are:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eOver or under-sizing brass cases cause \"clicking\" on extraction, catastrophic case failure, work-hardening your brass, and ultimately unnecessarily shortened life.\u003c\/li\u003e\n\u003cli\u003ePoor manufacturing processes result in case concentricity issues. It is rare to find a die that will size brass straight. This is essential for concentric bullet contact in the throat of the chamber.\u003c\/li\u003e\n\u003cli\u003eBushing dies that don't allow full sizing of the neck. In some cases, partial neck sizing is desirable, but with the Micron Series, you can at least customize this aspect.\u003c\/li\u003e\n\u003cli\u003eDie chambers are not concentric with the threads and, therefore, the press ram.\u003c\/li\u003e\n\u003cli\u003eLock rings are not square to the die threads, resulting in misalignment to the press.\u003c\/li\u003e\n\u003cli\u003eThe internal surface of the die chamber is poorly finished, causing scratches on the brass.\u003c\/li\u003e\n\u003cli\u003eOften, the reamers used to make the dies are outside specification relative to the chamber dimensions, resulting in improper forming of the sized brass.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eHistory in Die Making\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBullet Central has made sizing dies for several years, which are used by the most particular shooting professionals worldwide. With the Micron Series, they decided to redesign the dies and make them 100% in-house to their specifications. To this end, they have invested significantly in state-of-the-art machinery that will allow them to control the process from beginning to end, bringing you what they believe is a sizing die without equal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Micron Precision Die Series Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eCustom-sized die bodies for each caliber. They do not believe in a one-size-fits-all approach. This allows for the sizing of the entire neck if desired. The reloader can also choose a die cap that will allow for partial neck sizing if needed.\u003c\/li\u003e\n\u003cli\u003eTheir CNC machinery and processes allow for the industry's highest level of straightness and precision.\u003c\/li\u003e\n\u003cli\u003eA brand new Die-Loc lock-ring system that allows for two perfectly machined rings to come together and hold the die perpendicular to the top of the press and not be misaligned, as often is the case with a single lock ring.\u003c\/li\u003e\n\u003cli\u003eAfter all the CNC processes, every Micron Precision Die is finished by hand, inspected, and sent out for nitride hardening. Once hardened, the dies are individually polished and checked again before being ready for sale.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eIn conclusion, these dies are proven by the world's best rifle competitors. From Benchrest to Barricades, your investment in a Micron Precision Die will give you the peace of mind that your brass is cared for after each firing. One of the most essential items in your reloading setup is your sizing die.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdditional Die Information\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eThey are designed to size the entire case body up to the 0.200\" line based on SAAMI \u0026amp; CIP standard chamber dimensions. Case springback is factored into the amount the die resizes, using customized sizes for every cartridge. This is a different but more consistent method than sending in fired brass to have a die made.\u003c\/li\u003e\n\u003cli\u003eThe shoulder bump is adjusted by moving the die up or down in the press; Bullet Central does not recommend bottoming out the die on a shell holder and using a standard bump number! Since a reamer is used to cut the die chamber, the angles on the shoulder neck \u0026amp; body junctions will match the SAAMI \u0026amp; CIP designated angles, giving that brass a tighter unimpeded chamber fit.\u003c\/li\u003e\n\u003cli\u003eNecks are sized using a 0.5\" standard neck bushing (they recommend their bushing because it is as straight as they get); this allows you to tune neck tension to achieve the best possible accuracy. Bushings also allow the sizing die to be used for necked-down cases using the appropriate bushing. The bushing retainer cap is designed to keep the bushing parallel to the die body to help achieve the straightest possible necks.\u003c\/li\u003e\n\u003cli\u003eThe sizer dies body is cut, threaded, and reamed all in one operation which almost eliminates runout or out of spec die chambers. The body being made as one solid part avoids any fitment issue or added concentricity problems found with dies that have interchangeable parts. (Keep it simple! The fewer parts involved the better!)\u003c\/li\u003e\n\u003cli\u003eThe die body is hand polished and nitrided to protect the surface and add lubricity to the chamber of the die.\u003c\/li\u003e\n\u003cli\u003eA brand new Die-Loc lock-ring system that allows for two perfectly machined rings to come together and hold the die perpendicular to the top of the press and not be misaligned as often is the case with a single lock ring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eAnatomy Of the Die\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cp\u003eSee the Second picture, a diagram showing you a cros-section of the die. Notice how the chamber opens up at the shoulder to accommodate different bushing sizes. This design allows for you to \"neck down\" cases of similar calibers.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Micron Precision","offers":[{"title":"Default Title","offer_id":46445105381507,"sku":"BLCREMS0046","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/121826.jpg?v=1772033795"},{"product_id":"micron-precision-series-300-nm-bushing-sizer-die","title":"Micron Precision Micron Precision Series Bushing Sizing Die 300 Norma Magnum","description":"\u003cp\u003e\u003cstrong\u003eMicron Precision Die Series by Bullet Central.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eAfter over 40 years of rifle competition, and having used resizing dies from many manufacturers. Bullet Central has found that most commercially available dies will not let you take full advantage of the potential of reloading for accuracy.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon problems that constantly frustrate shooters are:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eOver or under-sizing brass cases cause \"clicking\" on extraction, catastrophic case failure, work-hardening your brass, and ultimately unnecessarily shortened life.\u003c\/li\u003e\n\u003cli\u003ePoor manufacturing processes result in case concentricity issues. It is rare to find a die that will size brass straight. This is essential for concentric bullet contact in the throat of the chamber.\u003c\/li\u003e\n\u003cli\u003eBushing dies that don't allow full sizing of the neck. In some cases, partial neck sizing is desirable, but with the Micron Series, you can at least customize this aspect.\u003c\/li\u003e\n\u003cli\u003eDie chambers are not concentric with the threads and, therefore, the press ram.\u003c\/li\u003e\n\u003cli\u003eLock rings are not square to the die threads, resulting in misalignment to the press.\u003c\/li\u003e\n\u003cli\u003eThe internal surface of the die chamber is poorly finished, causing scratches on the brass.\u003c\/li\u003e\n\u003cli\u003eOften, the reamers used to make the dies are outside specification relative to the chamber dimensions, resulting in improper forming of the sized brass.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eHistory in Die Making\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBullet Central has made sizing dies for several years, which are used by the most particular shooting professionals worldwide. With the Micron Series, they decided to redesign the dies and make them 100% in-house to their specifications. To this end, they have invested significantly in state-of-the-art machinery that will allow them to control the process from beginning to end, bringing you what they believe is a sizing die without equal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Micron Precision Die Series Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eCustom-sized die bodies for each caliber. They do not believe in a one-size-fits-all approach. This allows for the sizing of the entire neck if desired. The reloader can also choose a die cap that will allow for partial neck sizing if needed.\u003c\/li\u003e\n\u003cli\u003eTheir CNC machinery and processes allow for the industry's highest level of straightness and precision.\u003c\/li\u003e\n\u003cli\u003eA brand new Die-Loc lock-ring system that allows for two perfectly machined rings to come together and hold the die perpendicular to the top of the press and not be misaligned, as often is the case with a single lock ring.\u003c\/li\u003e\n\u003cli\u003eAfter all the CNC processes, every Micron Precision Die is finished by hand, inspected, and sent out for nitride hardening. Once hardened, the dies are individually polished and checked again before being ready for sale.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eIn conclusion, these dies are proven by the world's best rifle competitors. From Benchrest to Barricades, your investment in a Micron Precision Die will give you the peace of mind that your brass is cared for after each firing. One of the most essential items in your reloading setup is your sizing die.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdditional Die Information\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eThey are designed to size the entire case body up to the 0.200\" line based on SAAMI \u0026amp; CIP standard chamber dimensions. Case springback is factored into the amount the die resizes, using customized sizes for every cartridge. This is a different but more consistent method than sending in fired brass to have a die made.\u003c\/li\u003e\n\u003cli\u003eThe shoulder bump is adjusted by moving the die up or down in the press; Bullet Central does not recommend bottoming out the die on a shell holder and using a standard bump number! Since a reamer is used to cut the die chamber, the angles on the shoulder neck \u0026amp; body junctions will match the SAAMI \u0026amp; CIP designated angles, giving that brass a tighter unimpeded chamber fit.\u003c\/li\u003e\n\u003cli\u003eNecks are sized using a 0.5\" standard neck bushing (they recommend their bushing because it is as straight as they get); this allows you to tune neck tension to achieve the best possible accuracy. Bushings also allow the sizing die to be used for necked-down cases using the appropriate bushing. The bushing retainer cap is designed to keep the bushing parallel to the die body to help achieve the straightest possible necks.\u003c\/li\u003e\n\u003cli\u003eThe sizer dies body is cut, threaded, and reamed all in one operation which almost eliminates runout or out of spec die chambers. The body being made as one solid part avoids any fitment issue or added concentricity problems found with dies that have interchangeable parts. (Keep it simple! The fewer parts involved the better!)\u003c\/li\u003e\n\u003cli\u003eThe die body is hand polished and nitrided to protect the surface and add lubricity to the chamber of the die.\u003c\/li\u003e\n\u003cli\u003eA brand new Die-Loc lock-ring system that allows for two perfectly machined rings to come together and hold the die perpendicular to the top of the press and not be misaligned as often is the case with a single lock ring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eAnatomy Of the Die\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cp\u003eSee the Second picture, a diagram showing you a cros-section of the die. Notice how the chamber opens up at the shoulder to accommodate different bushing sizes. This design allows for you to \"neck down\" cases of similar calibers.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Micron Precision","offers":[{"title":"Default Title","offer_id":46445105479811,"sku":"BLCREMS0044","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/121832.jpg?v=1772033792"},{"product_id":"micron-precision-series-300-nm-imp-bushing-sizer-die","title":"Micron Precision Micron Precision Series Bushing Sizing Die 300 Norma Magnum Improved 35 Degree Shoulder (300NI35AW)","description":"\u003cp\u003e\u003cstrong\u003eMicron Precision Die Series by Bullet Central.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eAfter over 40 years of rifle competition, and having used resizing dies from many manufacturers. Bullet Central has found that most commercially available dies will not let you take full advantage of the potential of reloading for accuracy.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon problems that constantly frustrate shooters are:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eOver or under-sizing brass cases cause \"clicking\" on extraction, catastrophic case failure, work-hardening your brass, and ultimately unnecessarily shortened life.\u003c\/li\u003e\n\u003cli\u003ePoor manufacturing processes result in case concentricity issues. It is rare to find a die that will size brass straight. This is essential for concentric bullet contact in the throat of the chamber.\u003c\/li\u003e\n\u003cli\u003eBushing dies that don't allow full sizing of the neck. In some cases, partial neck sizing is desirable, but with the Micron Series, you can at least customize this aspect.\u003c\/li\u003e\n\u003cli\u003eDie chambers are not concentric with the threads and, therefore, the press ram.\u003c\/li\u003e\n\u003cli\u003eLock rings are not square to the die threads, resulting in misalignment to the press.\u003c\/li\u003e\n\u003cli\u003eThe internal surface of the die chamber is poorly finished, causing scratches on the brass.\u003c\/li\u003e\n\u003cli\u003eOften, the reamers used to make the dies are outside specification relative to the chamber dimensions, resulting in improper forming of the sized brass.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eHistory in Die Making\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBullet Central has made sizing dies for several years, which are used by the most particular shooting professionals worldwide. With the Micron Series, they decided to redesign the dies and make them 100% in-house to their specifications. To this end, they have invested significantly in state-of-the-art machinery that will allow them to control the process from beginning to end, bringing you what they believe is a sizing die without equal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Micron Precision Die Series Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eCustom-sized die bodies for each caliber. They do not believe in a one-size-fits-all approach. This allows for the sizing of the entire neck if desired. The reloader can also choose a die cap that will allow for partial neck sizing if needed.\u003c\/li\u003e\n\u003cli\u003eTheir CNC machinery and processes allow for the industry's highest level of straightness and precision.\u003c\/li\u003e\n\u003cli\u003eA brand new Die-Loc lock-ring system that allows for two perfectly machined rings to come together and hold the die perpendicular to the top of the press and not be misaligned, as often is the case with a single lock ring.\u003c\/li\u003e\n\u003cli\u003eAfter all the CNC processes, every Micron Precision Die is finished by hand, inspected, and sent out for nitride hardening. Once hardened, the dies are individually polished and checked again before being ready for sale.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eIn conclusion, these dies are proven by the world's best rifle competitors. From Benchrest to Barricades, your investment in a Micron Precision Die will give you the peace of mind that your brass is cared for after each firing. One of the most essential items in your reloading setup is your sizing die.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdditional Die Information\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eThey are designed to size the entire case body up to the 0.200\" line based on SAAMI \u0026amp; CIP standard chamber dimensions. Case springback is factored into the amount the die resizes, using customized sizes for every cartridge. This is a different but more consistent method than sending in fired brass to have a die made.\u003c\/li\u003e\n\u003cli\u003eThe shoulder bump is adjusted by moving the die up or down in the press; Bullet Central does not recommend bottoming out the die on a shell holder and using a standard bump number! Since a reamer is used to cut the die chamber, the angles on the shoulder neck \u0026amp; body junctions will match the SAAMI \u0026amp; CIP designated angles, giving that brass a tighter unimpeded chamber fit.\u003c\/li\u003e\n\u003cli\u003eNecks are sized using a 0.5\" standard neck bushing (they recommend their bushing because it is as straight as they get); this allows you to tune neck tension to achieve the best possible accuracy. Bushings also allow the sizing die to be used for necked-down cases using the appropriate bushing. The bushing retainer cap is designed to keep the bushing parallel to the die body to help achieve the straightest possible necks.\u003c\/li\u003e\n\u003cli\u003eThe sizer dies body is cut, threaded, and reamed all in one operation which almost eliminates runout or out of spec die chambers. The body being made as one solid part avoids any fitment issue or added concentricity problems found with dies that have interchangeable parts. (Keep it simple! The fewer parts involved the better!)\u003c\/li\u003e\n\u003cli\u003eThe die body is hand polished and nitrided to protect the surface and add lubricity to the chamber of the die.\u003c\/li\u003e\n\u003cli\u003eA brand new Die-Loc lock-ring system that allows for two perfectly machined rings to come together and hold the die perpendicular to the top of the press and not be misaligned as often is the case with a single lock ring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eAnatomy Of the Die\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cp\u003eSee the Second picture, a diagram showing you a cros-section of the die. Notice how the chamber opens up at the shoulder to accommodate different bushing sizes. This design allows for you to \"neck down\" cases of similar calibers.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Micron Precision","offers":[{"title":"Default Title","offer_id":46445105643651,"sku":"BLCREMS0054","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/121827.jpg?v=1772033794"},{"product_id":"hornady-22-creedmoor-match-grade-bushing-fl-size-die","title":"Hornady Match Grade Bushing Full Length Sizer Die 22 Creedmoor","description":"\u003cp\u003e\u003cspan style=\"font-family: acumin-pro, sans-serif; font-size: medium; letter-spacing: 0.48px;\"\u003eHornady® Match™ Grade Dies give you total control over neck tension in the resizing process. These dies feature the ability to use interchangeable, self-centering neck size bushings that eliminate the chance of over sizing your case necks and overworking the brass.* Tight tolerances at the press translate into tighter groups at the range.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hornady","offers":[{"title":"Default Title","offer_id":46445105741955,"sku":"HRN046563","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/122347.jpg?v=1772033793"},{"product_id":"hornady-22-creedmoor-premium-match-grade-2-die-set-1","title":"Hornady Match Grade 2 Die Set 22 Creedmoor","description":"","brand":"Hornady","offers":[{"title":"Default Title","offer_id":46445105873027,"sku":"HRN545102","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/122337.jpg?v=1772033792"},{"product_id":"hornady-bushing-282-diameter","title":"Hornady Match Grade .282 Diameter Die Bushing","description":"","brand":"Hornady","offers":[{"title":"Default Title","offer_id":46445105905795,"sku":"HRN594282","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/122345.jpg?v=1772033793"},{"product_id":"forster-308-winchester-bushing-bump-neck-sizing-die","title":"Forster Bushing Bump Neck Sizer Die 308 Winchester","description":"\u003cp\u003eThe Forster Bench Rest® Bushing Bump Sizing Die brings an advanced precision level to hand loaders by allowing you to precisely control the amount of neck sizing tension in your reloaded cartridge brass. The Die improves accuracy and prolongs case life because the necks are sized down as little as necessary while still “bumping” the shoulder of the case to maintain overall case concentricity and cartridge headspace length. Best of all, it prevents overworking the necks and allows you to control the amount of neck tension for your bullet seating operation.\u003c\/p\u003e\n\n\u003cp\u003eBushings sold separately.\u003c\/p\u003e","brand":"Forster","offers":[{"title":"Default Title","offer_id":46445106036867,"sku":"FRBBD3751","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/77647.jpg?v=1772033792"},{"product_id":"hornady-bushing-283-diameter","title":"Hornady Match Grade .283 Diameter Die Bushing","description":"","brand":"Hornady","offers":[{"title":"Default Title","offer_id":46445106299011,"sku":"HRN594283","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/122346.jpg?v=1772033794"},{"product_id":"hornady-bushing-279-diameter","title":"Hornady Match Grade .279 Diameter Die Bushing","description":"","brand":"Hornady","offers":[{"title":"Default Title","offer_id":46445106659459,"sku":"HRN594279","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/122342.jpg?v=1772033793"},{"product_id":"hornady-bushing-276-diameter","title":"Hornady Match Grade .276 Diameter Die Bushing","description":"","brand":"Hornady","offers":[{"title":"Default Title","offer_id":46445107019907,"sku":"HRN594276","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/122339.jpg?v=1772033792"},{"product_id":"lee-full-length-szng-die-270-winchester","title":"Lee Precision Full Length Sizer Die 270 Winchester","description":"","brand":"Lee","offers":[{"title":"Default Title","offer_id":46445107478659,"sku":"LEE91056","price":18.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/111404.jpg?v=1772033800"},{"product_id":"redding-7mm-wsm-form-trim-die","title":"Redding Trim Die 7mm WSM (Winchester Short Magnum)","description":"\u003cp\u003eRedding trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. For case forming and necking brass down from another caliber, Redding trim dies can be the perfect intermediate step before full length resizing.\u003c\/p\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445107773571,"sku":"RED83265","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/16004.jpg?v=1772033792"},{"product_id":"redding-30-06-springfield-deluxe-die-set-metric","title":"Redding Deluxe Metric 3 Die Set 30-06 Springfield","description":"\u003cp\u003eThe Premium Deluxe Die Sets contains a Full Length Sizing Die with Carbide Size Button, a Neck Sizing Die, and a conventional Bullet Seating Die with a Metric Bullet Seating Micrometer.\u003c\/p\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445109575811,"sku":"RED52148","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/108132.jpg?v=1772033801"},{"product_id":"redding-28-nosler-seater-die-competition","title":"Redding Competition Seater Die 28 Nosler","description":"\u003cp\u003eThis patented design quickly established itself as the “state of the art” in straight line bullet seaters and beat the concentricity problems inherent in all other seating dies of this type. Tighter manufacturing tolerances were made possible due to the details of the floating seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to “float” on a column of air. The seating stem is precision ground to exactly match the bullet  diameter.\u003c\/p\u003e\n\n\u003cp\u003eAlignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before the bullet seating begins. The micrometer is calibrated in .001\" increments for precise seating depth and is infinitely adjustable. The micrometer also has a feature that allows you to re-set it to your favorite seating depth. No seating die on the market is built to this level of precision.\u003c\/p\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445110952067,"sku":"RED55790","price":143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/75337.jpg?v=1772033798"},{"product_id":"redding-bushing-189-steel","title":"Redding Heat Treated Steel .189 Diameter Neck Sizer Bushing","description":"\u003cp\u003eRedding Neck Sizing Bushings are freely interchange in all Redding Bushing type Neck Sizing Dies.  By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. Made of heat treated steel.  The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.  The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer. Then, simply subtract .001\" from the cartridge that had the smallest average neck diameter. Moly coated bullets may require tighter necks and the use of bushings .001” or .002” smaller.\u003c\/p\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445111869571,"sku":"RED73189","price":23.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/15006.jpg?v=1772033792"},{"product_id":"lee-22-tcm-factory-crimp-die","title":"Lee Precision Collet Style Factory Crimp Crimp Die 22 TCM","description":"\u003cp\u003eLee 22 TCM Bottle Neck Factory Crimp Dies crimps the bullet firmly in place for the bottleneck cartridge.\u003c\/p\u003e","brand":"Lee","offers":[{"title":"Default Title","offer_id":46445113016451,"sku":"LEE90087","price":20.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/36575.jpg?v=1772033799"},{"product_id":"redding-280-remington-imp-40-form-trim-die","title":"Redding Trim Die 280 Ackley Improved","description":"\u003cp\u003eRedding trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. For case forming and necking brass down from another caliber, Redding trim dies can be the perfect intermediate step before full length resizing.\u003c\/p\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445113802883,"sku":"RED83428","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/16051.jpg?v=1772033800"},{"product_id":"lee-45-colt-collet-style-crimp-die","title":"Lee Precision Collet Style Factory Crimp Crimp Die 45 Colt (Long Colt)","description":"\u003cp\u003eCollet Style Crimp Die: Incorporates a collet to apply a rifle type crimp to the case. Makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the collet is so powerful it will form one. NOTE: This die is not carbide.\u003c\/p\u003e","brand":"Lee","offers":[{"title":"Default Title","offer_id":46445115834499,"sku":"LEE90302","price":13.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/7750.jpg?v=1772033799"},{"product_id":"wilson-bushing-287-steel","title":"L.E. Wilson .287 Diameter Neck Sizer Die Bushing","description":"\u003cul\u003e\n\u003cli\u003eSizes your case neck in the Wilson Neck Die or Wilson Bushing Type Full Length Sizing Die\u003c\/li\u003e\n\u003cli\u003eTo figure out what size you need see formula below\u003c\/li\u003e\n\u003cli\u003eMade In the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003eThe Neck Die Bushing fits in the Neck Die and sizes the case neck to grip the bullet.\u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cstrong\u003eTo figure out what size to order\u003c\/strong\u003e... Measure the diameter of a loaded round where the bullet sits in the neck (Ex. .268).  Now subtract .002 to .003 from that number.  \u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e.268 -.002 = .266 Bushing\u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003eAnother way is to measure your wall thickness and multiply by 2 and add bullet diameter.  Then subtract .002 to .003 from that number.\u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e.012 Wall Thickness x 2 = .024\u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e.243 Bullet Diameter\u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003eExample:  .243 + .024 = .267   Now subtract .003 (.267 - .003 = .264 Bushing)\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Wilson Reloading Tools","offers":[{"title":"Default Title","offer_id":46445115900035,"sku":"LWB287","price":23.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/83936.jpg?v=1772033802"},{"product_id":"lee-44-40-winchester-factory-crimp-die","title":"Lee Precision Factory Crimp Crimp Die 44-40 WCF","description":"\u003cp\u003eThe Lee Factory Crimp die crimps the bullet in place more firmly than any other tool. It is impossible to buckle the case as with regular roll crimp dies. Trim length is not critical.\u003c\/p\u003e","brand":"Lee","offers":[{"title":"Default Title","offer_id":46445116457091,"sku":"LEE90854","price":13.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/8194.jpg?v=1772033802"},{"product_id":"lee-full-length-szng-die-300-savage","title":"Lee Precision Full Length Sizer Die 300 Savage","description":"\u003cp\u003e300 Savage Rifle Steel Full Length Sizing Die Complete.\u003c\/p\u003e","brand":"Lee","offers":[{"title":"Default Title","offer_id":46445116817539,"sku":"LEE91078","price":18.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/111426.jpg?v=1772033800"},{"product_id":"forster-7mm-stw-full-length-sizer-die","title":"Forster Full Length Sizer Die 7mm STW (Shooting Times Westerner)","description":"\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eUse after each firing or after several firings, when the resulting brass flow will require the case to be full-length sized. Allows case to be re-chambered in any SAAMI rifle chamber with minimal play.\u003c\/p\u003e\n\n\u003cp\u003eFeatures\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSizes the case neck, shoulder and body and expands the neck and removes the spent primer.\u003c\/li\u003e\n\u003cli\u003ePrecisely-positioned vent hole located in the threaded or recessed portion of the die body prevents excessive, trapped air and\/or lubrications from damaging the die’s components or your cases.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eNote: For use on military brass with crimped primers, use a decapping die first to remove spent primer (not available from Forster Products).\u003c\/p\u003e","brand":"Forster","offers":[{"title":"Default Title","offer_id":46445117997187,"sku":"FR005521","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/4706.jpg?v=1772033801"},{"product_id":"rcbs-9mm-luger-taper-crimp-seater-die","title":"RCBS Taper Crimp Crimp Die 9mm Luger","description":"\u003cp\u003eIncludes seater die with taper crimp and bullet seater plug for seating and crimping the bullet.\u003c\/p\u003e","brand":"RCBS","offers":[{"title":"Default Title","offer_id":46445118029955,"sku":"RCBS20562","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/13424.jpg?v=1772033804"},{"product_id":"redding-223-remington-imp-type-s-neck-bushing-die-set","title":"Redding Type S-Bushing 3 Die Set 223 Remington Ackley Improved","description":"\u003cp\u003eRedding Type S Bushning Neck Die Sets include a Type S Bushing Neck Sizing Die, a Body Die and a standard seating die.  (Bushings sold separately.)\u003c\/p\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445118062723,"sku":"RED78907","price":177.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/15529.jpg?v=1772033803"},{"product_id":"forster-270-weatherby-mag-full-length-sizer-die","title":"Forster Full Length Sizer Die 270 Weatherby Magnum","description":"\u003cp\u003eOur Bench Rest® Sizing Dies are manufactured from the finest quality steel and are hand polished both before and after heat treating to guarantee an extra-fine finish.  They are all equipped with our exclusive E-Z Out Expander button which solves the age-old problem of keeping case necks concentric during the neck expanding operation. The Floating E-Z Out Expander corrects misalignment of the center spindle assembly and prevents the case neck from pulling off center during the expanding procedure. Our exclusive design also reduces the effort required to draw the expander through the case neck because it takes full mechanical advantage of the power developed in the linkage of your press. Our Bench Rest Sizer Dies are manufactured with one-piece reamers to help guarantee concentricity between all machined diameters.\u003c\/p\u003e","brand":"Forster","offers":[{"title":"Default Title","offer_id":46445119635587,"sku":"FR005431","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/4696.jpg?v=1772033801"},{"product_id":"wilson-264-winchester-mag-bushing-neck-die","title":"L.E. Wilson Stainless Steel Neck Sizer Die 264 Winchester Magnum","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eDesigned so the user can control and\/or change the amount of neck sizing the cartridge case receives. Uses interchangeable sizing bushings that size the outside of the case neck. The conventional expander is eliminated, improving concentricity and prolonging brass life. The die is used with an Arbor Press. Sizes the neck to 3\/16\" from the mouth end, a practice many shooters prefer. Bushings not included. Dies include a decapping rod.\u003c\/span\u003e\u003c\/p\u003e","brand":"Wilson Reloading Tools","offers":[{"title":"Default Title","offer_id":46445121831043,"sku":"LWSND264WM","price":84.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/70861.jpg?v=1772033804"},{"product_id":"redding-micrometer-1-seat-plug-vld-style-24","title":"Redding 1\" Series #24 Bullet Seater Micrometer with VLD Seat Plug","description":"","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445126746243,"sku":"RED09684","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/108064.jpg?v=1772033804"},{"product_id":"rcbs-33-nosler-fl-die-set","title":"RCBS Group D Die Set 33 Nosler","description":"\u003cp\u003eRCBS Precision dies are designed to deliver superior performance plus easy adjustment and operation. Sets feature: sizing dies with tolerance twice as stringent as typical firearms and ammunition for consistent chambering round after round. Fine body knurling for easy, non-slip adjustment. Hardened die bodies. Easy, adjustable expander-decapping unit locks in place, eliminating slippage. Three-piece expander\/decapping unit lets you replace the decapping pin in a snap. Includes: full-length sizing die and seater die. Shellholders sold separately.\u003c\/p\u003e","brand":"RCBS","offers":[{"title":"Default Title","offer_id":46445128024195,"sku":"RCBS29301","price":91.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/74318.jpg?v=1772033803"},{"product_id":"redding-6mm-br-remington-type-s-match-full-die-set","title":"Redding Type S-Match 2 Die Set 6mm BR  (Bench Rest)","description":"\u003cp class=\"MsoNormal\"\u003eRedding Type S Match Bushing Full Die Sets include a Type S Full Sizing Die and a Competition Seating Die.\u003c\/p\u003e\n\n\u003cp class=\"MsoNormal\"\u003eThe Type S Bushing Full Sizing Die enables full length resizing while maintaining exact control of the case neck.  It uses interchangeable bushings (sold separately) and the adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired. \u003c\/p\u003e\n\n\u003cp class=\"MsoNormal\"\u003eThe Redding Competition Seating Die has established itself as the “state of the art” in straight line bullet seaters.  The seating stem is precision ground to exactly match the bullet diameter.  No seating die on the market is built to this level of precision.  The micrometer is calibrated in .001” increments for precise seating depth and is infinitely adjustable (without clicks).\u003c\/p\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445128679555,"sku":"RED36317","price":205.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/27068.jpg?v=1772033811"},{"product_id":"redding-22-nosler-type-s-match-full-die-set","title":"Redding Type S-Match 2 Die Set 22 Nosler","description":"\u003cp\u003eINCLUDES –\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eType S – Bushing Full Sizing Die (B\/FL)\u003c\/li\u003e\n\u003cli\u003eCompetition Seating Die (COMP ST)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445128712323,"sku":"RED36768","price":205.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/74715.jpg?v=1772033810"},{"product_id":"redding-heat-treated-stl-neck-sizing-bushing-399","title":"Redding Heat Treated Steel .399 Diameter Neck Sizer Bushing","description":"","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445130383491,"sku":"RED73399","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/108199.jpg?v=1772033801"},{"product_id":"forster-300-prc-fl-bush-sizer-micro-seater-set","title":"Forster Ultra Bushing 2 Die Set 300 PRC","description":"\u003cdiv\u003e\n\u003cp\u003eSet includes Bushing Full Length Sizing Die, Bench Rest® Ultra Micrometer Seater Die and 3 bushings.\u003c\/p\u003e\n\n\u003cp\u003eThe Bushing Full Length Sizing Die offers advanced precision by allowing you to precisely control the amount of neck sizing tension in your reloaded brass while sizing the body and bumping the shoulder. This die improves accuracy and prolongs case life because the case’s shoulder and body is sized down just enough to fit in a minimum-sized SAAMI rifle chamber, and bushing limits working of the neck.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Forster","offers":[{"title":"Default Title","offer_id":46445132480643,"sku":"FRUFB4749","price":222.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/107595.jpg?v=1772033804"},{"product_id":"rcbs-22-creedmoor-match-master-seater-die","title":"RCBS MatchMaster Competition Micrometer Seater Die 22 Creedmoor","description":"\u003cp\u003eRCBS MatchMaster Seater Die\u003c\/p\u003e","brand":"RCBS","offers":[{"title":"Default Title","offer_id":46445133136003,"sku":"RCBS10140","price":121.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/82645.jpg?v=1772033801"},{"product_id":"lee-220-swift-collet-neck-die-only","title":"Lee Precision Neck Sizer Die 220 Swift","description":"\u003cp\u003eLee Collet 220 Swift Die only that uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.\u003c\/p\u003e","brand":"Lee","offers":[{"title":"Default Title","offer_id":46445133201539,"sku":"LEE91004","price":24.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/108729.jpg?v=1772033805"},{"product_id":"lee-full-length-szng-die-243-winchester","title":"Lee Precision Full Length Sizer Die 243 Winchester","description":"","brand":"Lee","offers":[{"title":"Default Title","offer_id":46445134348419,"sku":"LEE91040","price":18.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/111388.jpg?v=1772033800"},{"product_id":"redding-bushing-312-steel","title":"Redding Heat Treated Steel .312 Diameter Neck Sizer Bushing","description":"\u003cp\u003eRedding Neck Sizing Bushings are freely interchange in all Redding Bushing type Neck Sizing Dies.  By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. Made of heat treated steel.  The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing effort.  The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer. Then, simply subtract .001\" from the cartridge that had the smallest average neck diameter. Moly coated bullets may require tighter necks and the use of bushings .001” or .002” smaller.\u003c\/p\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445135003779,"sku":"RED73312","price":23.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/15108.jpg?v=1772033807"},{"product_id":"wilson-224-valkyrie-stls-chamber-type-micro-seater","title":"L.E. Wilson Stainless Steel Chamber Type Micrometer Seater Die 224 Valkyrie","description":"\u003cp\u003eThe most accurate and easiest to use straight line dies on the market.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eBullet Seater pictured here has a built in micrometer for seating depth adjustment, easy to read scale in .001 graduations.\u003c\/li\u003e\n\u003cli\u003eMajor seating adjustments can be made with the 3\/8\" - 24 TPI threads in the cap.\u003c\/li\u003e\n\u003cli\u003eLong lasting stainless steel material\u003c\/li\u003e\n\u003cli\u003eLaser engraved marking\u003c\/li\u003e\n\u003cli\u003eSimple and easy to use\u003c\/li\u003e\n\u003cli\u003eTake with you to the range and adjust seating depth to find your chambers optimal seating depth\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wilson Reloading Tools","offers":[{"title":"Default Title","offer_id":46445135298691,"sku":"LWS224VAL","price":135.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/84481.jpg?v=1772033812"},{"product_id":"redding-22-nosler-body-die","title":"Redding Body Die 22 Nosler","description":"\u003cp\u003eRedding has been making Body Dies for Benchrest Shooters for years, but they were never a catalogued item. Now, with the introduction of the Bushing-Style Neck Sizing Dies, they are available as a companion item for most cartridges.\u003c\/p\u003e\n\n\u003cp\u003eBody Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.\u003c\/p\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445135855747,"sku":"RED75768","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/74724.jpg?v=1772033791"},{"product_id":"redding-40-super-fl-3-die-set-steel","title":"Redding 3 Die Set 40 Super","description":"\u003cp\u003e\u003c\/p\u003e\n\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 12pt; line-height: normal;\"\u003e\u003cspan style=\"font-size: 12pt; font-family: \" times new roman\u003eRedding dies are made of the finest alloy steels obtainable and machined on Hardinge Super- Precision lathes capable of holding the tightest tolerances in the industry.\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003e  \u003c\/span\u003eTo maintain tolerances and guarantee that your dies will last a lifetime, all Redding dies are heat treated in atmospherically controlled furnaces.\u003cspan\u003e  \u003c\/span\u003eFinally, your dies are hand polished for smooth, flawless functioning, go through final inspection, and are ultrasonically cleaned and packaged.\u003cspan\u003e  \u003c\/span\u003eThe die box is a handy cartridge loading block and storage package. Inside is a spare decapping pin, hex wrench, and even a place for your shellholder (sold separately).\u003cspan\u003e  \u003c\/span\u003eAll Redding dies use the industry standard 7\/8-14 threaded bodies.\u003cspan\u003e  \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-size: 12pt; font-family: \" times new roman\u003eDie sets for straight wall cases contain three dies:\u003cspan\u003e  \u003c\/span\u003ea full length resizing die, an expander die with neck expanding plug, and seating die with built in crimp ring and the proper seating plug.\u003cspan\u003e  \u003c\/span\u003eDie sets for bottleneck cases contain two dies:  a full length resizing die and seating die with built in crimp ring.\u003cbr\u003e \u003cbr\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445136609411,"sku":"RED80677","price":122.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/15758.jpg?v=1772033792"},{"product_id":"lee-224-valkyrie-quick-trim-die","title":"Lee Precision Quick Trim Die 224 Valkyrie","description":"\u003cp\u003e224 VALKYRIE QUICK TRIM DIE\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Lee","offers":[{"title":"Default Title","offer_id":46445138247811,"sku":"LEE90868","price":16.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/28939.jpg?v=1772033791"},{"product_id":"lee-7mm-remington-mag-quick-trim-die","title":"Lee Precision Quick Trim Die 7mm Remington Magnum","description":"\u003cp\u003eThis is a trim die only for the Deluxe Quick Trim Case Trimmer and Value Trim Case Trimmer, both sold separately.  With the addition of either of these tools, simply install the appropriate quick trim die in your press and start trimming.  No calipers, measurement or adjustment required. Simply install the appropriate quick trim die in your press and start trimming. A click adjustable stop allows trim length adjustment in .   001 of an inch increments. Allows the user to shorten case to a uniform shorter length than standard, reducing trimming frequency. Includes snap on chip catcher.  Trim Die only.\u003c\/p\u003e","brand":"Lee","offers":[{"title":"Default Title","offer_id":46445138313347,"sku":"LEE90297","price":13.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/26070.jpg?v=1772033791"},{"product_id":"redding-7mm-remington-sa-ultra-neck-size-die","title":"Redding Neck Sizer Die 7mm Remington SAUM (Short Action Ultra Magnum)","description":"\u003cp\u003eThese dies size only the necks of your bottleneck cases to prolong brass life and improve accuracy. It is important to note that since these dies size only the neck and not the shoulder or body, fired cases should not be interchanged between rifles of the same caliber.\u003c\/p\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445138378883,"sku":"RED81280","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/15867.jpg?v=1772033791"},{"product_id":"redding-284-winchester-1-fl-series-z-die","title":"Redding Z Series Full Length Sizer Die 284 Winchester","description":"\u003ch3 class=\"swat-frame-title\"\u003e \u003c\/h3\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe revolutionary Z Series Die Family utilizes larger, stronger and more robust 1 die bodies.\u003cimg src=\"https:\/\/opl.0ps.us\/assets-fbedd721dff\/base\/opweb\/base\/desktop\/img\/pixels\/description-product-pixel.gif\" alt=\"image\" width=\"1\" height=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445138509955,"sku":"RED87141","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/108263.jpg?v=1772033792"},{"product_id":"redding-6mm-arc-type-s-elite-bushing-3-die-set","title":"Redding Type S-Elite 3 Die Set 6mm ARC","description":"\u003cdiv\u003e\n\u003cp\u003eThe Type S Elite set is comprised of a Type S Bushing Full Die, A Type S Bushing Neck Die and the unparalleled Redding Competition Seating Die.\u003c\/p\u003e\n\n\u003cp\u003eAll Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001”. Bushings are available in hardened steel but also are available with a TIN (Titanium Nitride) coating for even greater lubricity. This allows the handloader complete control and precision when setting the appropriate neck tension without fear of over working the brass in the case neck. These bushings are also free-floating to self-center on the case neck for a higher degree of sizing accuracy. These features provide not only an enhanced degree of control but significant improvements to consistency and accuracy of the final loaded rounds.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445139296387,"sku":"RED60674","price":321.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/120904.jpg?v=1772033793"},{"product_id":"lee-32-auto-carbide-undersize-sizing-die","title":"Lee Precision Carbide Undersized Sizer Die 32 ACP","description":"\u003cp\u003e.003\" Undersize Carbide Sizing Die 32 ACP or 32 S\u0026amp;W Long\u003c\/p\u003e","brand":"Lee","offers":[{"title":"Default Title","offer_id":46445142311043,"sku":"LEE91759","price":24.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/88942.jpg?v=1772033791"},{"product_id":"forster-222-remington-mag-bench-rest-seater-die","title":"Forster Bench Rest Bullet Seater Die 222 Remington Magnum","description":"\u003cp\u003eMore than twenty years ago, Forster\/Bonanza patented the design of the original Bench Rest® Seater Die. That patent covers the use of a specially machined, close fitting chamber that holds the case, the bullet and the seating stem all in perfect alignment. This innovative chamber design is still the hallmark of our Bench Rest Seater Dies, because it's the premier system of all the so-called \"in-line\" seater systems that actually supports the entire outside diameter of the sized case rather than just the bullet and case neck. Over the years, we have continued to refine our seating stems to better fit the newly designed ballistic tips and we now offer special seating stems to match your special bullet needs such as those encountered during the loading of some of the new VLD (Very Low Drag) bullets currently on the market.\u003c\/p\u003e","brand":"Forster","offers":[{"title":"Default Title","offer_id":46445143654531,"sku":"FR005851","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/4729.jpg?v=1772033802"},{"product_id":"redding-7mm-remington-mag-1-series-z-body-die","title":"Redding Z Series 1\" Body Die 7mm Remington Magnum","description":"","brand":"Redding","offers":[{"title":"Default Title","offer_id":46445145587843,"sku":"RED53136","price":81.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/108152.jpg?v=1772033803"},{"product_id":"rcbs-260-remington-neck-sizer-die","title":"RCBS Neck Sizer Die 260 Remington","description":"\u003cp\u003eSizes only the neck of the cases, not the shoulder or body.\u003c\/p\u003e","brand":"RCBS","offers":[{"title":"Default Title","offer_id":46445145882755,"sku":"RCBS12830","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0669\/5128\/2819\/files\/13198.jpg?v=1772033792"}],"url":"https:\/\/grafs.com\/collections\/reloading-dies-accessories.oembed?page=350","provider":"Graf \u0026 Sons","version":"1.0","type":"link"}