BORE TECH CARBON REMOVER 16oz (NON-AMMONIA) 12/CS

Recommended by an F class bench rest shooter. Not cheap but works VERY WELL. One wet patch, one dry patch, wet patch again, wait five minutes, dry patch and done. I've found there is no need to use a brush, the patch method has removed all the carbon and further brushing has had no benefit for me. Would highly recommend.

I bought this off of a recommendation of a friend and, boy, he was right! After a quick clean and letting it set for an hour, I ran dry patches through, and you could eat off the inside of the barrel. I'll never use anything else ever again!

The only cleaner that can completely remove carbon from the stainless revolver cylinders without any scrubbing. Inside the chambers can also be made factory new with the help of the 'tornado brush' available at Grafs also...

This works really good with no drama. I have to use gloves with some of the other brands and be careful how long is stays in the barrel. With the Bore Tech, no gloves and no drama and no copper.

Its the BEST carbon remover on the market bar none!!! And does not harm your barrel.

This is all I use to cut carbon fouling.

This is the best and easiest to use carbon remover I have tried.

Product worked as described with no obnoxious odor like other solvents.