Hornady 30 Caliber (.308 Diameter) Bullets 150 grain Full Metal Jacket Case of 2100

Hornady 30 Caliber (.308 Diameter) Bullets 150 grain Full Metal Jacket Case of 2100

$440.99 $0.21 per piece
Skip to product information
Hornady 30 Caliber (.308 Diameter) Bullets 150 grain Full Metal Jacket Case of 2100
  • Hornady 30 Caliber (.308 Diameter) Bullets 150 grain Full Metal Jacket Case of 2100
Hornady 30 Caliber (.308 Diameter) Bullets 150 grain Full Metal Jacket Case of 2100

Hornady 30 Caliber (.308 Diameter) Bullets 150 grain Full Metal Jacket Case of 2100

(SKU:HRN3037B)
MPN: 3037B
$440.99 $0.21 per piece
In stock

Quantity:

Hornady Traditional and FMJ bullets are built with a rugged AMP® bullet jacket (Advanced Manufacturing Process) that clearly delivers better performance. The thin-plated full metal jacket offered by other manufacturers is easily distorted and often breaks or separates when the bullet impacts the target.

The Hornady AMP bullet jacket features virtually zero tolerance for concentricity and near-zero wall thickness variation, punching through targets without deforming or breaking.

  • RUGGED AMP® BULLET JACKET: Hornady Traditional and FMJ bullets are built with a rugged AMP® bullet jacket (Advanced Manufacturing Process) that clearly delivers better performance.
  • SUPERIOR DESIGN: The thin-plated full metal jacket offered by other manufacturers is easily distorted and often breaks or separates when the bullet impacts the target.
  • VIRTUALLY ZERO VARIATION: The Hornady AMP bullet jacket features virtually zero tolerance for concentricity and near-zero wall thickness variation, punching through targets without deforming or breaking.

This is not loaded ammunition.

Price listed is per Case. Quantity is 2100/case.

Warning
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.

Similar Products
  • 5 stars: 4 (67%)
  • 4 stars: 2 (33%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
P
Paul Jones
Excellent bullet, outstanding value

This is an excellent bullet for practice rounds. I've developed loads for this projectile in .300 Blackout (super), and .308 Win. This is an outstanding value!

C
Craig Mccarty
HORNADY 30c(.308) 150gr FMJBT BULLET BULK 2100/CS

Great product. arrived quickly. recommended !!!

T
Thomas Deaton
good quality for price

as other reviews mention, the cannelure throws you off a bit when setting things up, but the accuracy seems to be pretty good.

J
Jeff Blankinship
HORNADY 30c(.308) 150gr FMJBT BULLET

This HORNADY is my go to bullet for my 30 cal auto loaders. Good quality & good price. Will buy from Graf & Sons again & again.

E
Eric Leiss
cannelure

Ditto.

M
Marc Hom
The cannelure mystery solved!

Part one:
From: Me, to Hornady.
I am loading 308 Winchester, cases trimmed to 2.005" for an auto loading LR-308.
I have cut a case mouth with a mini cut off wheel just passed the shoulder on a full length sized and trimmed case. I hand seated your Item # 3037 "30 Cal .308 150 gr FMJ-BT" bullet at OAL 2.900 and chambered the round. I then carefully ejected the round and measured it @ OAL 2.815, that would be where the bullet makes contact with the rifling. So if I seat the bullet .035 away from the rifling to OAL 2.785" and the case mouth is .045" away from the bottom edge of the bullet cannelure, it would take .015" additional seating to get to the middle of the bullet cannelure .095" away from the rifling to OAL 2.725", is .095" away from the rifling safe?
(From: Hornady Manufacturing, Inc
“Thank you for contacting us. .095” is a safe distance off the lands. If you’d like to get closer you’ll be limited to magazine length, which in a 308 should be about 2.800”. As always, if you’re going to lengthen your seating depth I would recommend doing so in small batches and work up to the max length your mag will allow. If you’d like to visit further you can contact our tech team at [****]. Thank you”)

Part two:
So, I called them and when got off the phone with Hornady tech support they said those bullets are designed that way on purpose with a high bullet cannelure for auto loading applications like mine, the "LR-308". And to ignore the bullet cannelure if you are shooting a bolt action rifle, it might look ugly with the bullet cannelure showing way above the case mouth but they shoot fine. For bullet cannelure use they recommend the Hornady Bullet Seating Die #11 30 Caliber w/146 (.308) 044111. It is an In-line Bullet alignment Seating and crimping System. Because the bullet is seated further away from the rifling lands the bullet needs to be straighter in the case for better accuracy.
Other than that, they said it is safe for the bullet is seated .095" from the rifling lands, which would bring the OAL to roughly around 2.725" much shorter than the 2.790 I usually seat to. I just decreased the powder charge at least 10% and worked up from there.
So, the results with me using the cannelure @ OAL 2.725": I am getting 2782 fps and 1.5 MOA with BLC-2 in my 18.5” barreled DPMS LR-308. Not stellar speed or performance but you have to know it’s purpose is a barrier penetrating combat rifle, not an ultra-custom 26” barreled 1000yd paper hole puncher.

Thanks Graf & Sons for having them in stock.

Marc.

Share: