Peterson 308 Winchester Brass Small Rifle Primer Box of 50

Good stuff!

The flash holes on the small rifle primer brass is too small. Using an RCBS small de-capping pin it was getting stuck and pulling out every time. Sent an email to Peterson's customer service and they said ohh that’s too bad, sorry about your luck and suggested I grind down a pin for it to work. Seriously?? So I have to make a tool to get this crappy, over priced brass to work? So yeah I did grind one down and once I got the primer out I drilled it out with a 1/16” bit. That’s .0625” which is a tad bigger than the .060” hole for a SRP. I will never buy this garbage again.

Packaged well and appears to be well made. Unfortunately, I was unable to get consistent ignition of ball powder, specifically H335, even with small rifle magnum primers. Not the brasses fault.

Lapua was go to brass whenever it came to hand loading. Since I found Peterson and Graf and Sons this my new “go to “. These brass are of premium quality incase you are wondering, you expect to get or see reduced SD’s and sub MOA. I highly recommend them and Graf and Sons.

Got these to make SRP .243 Ackley Improved. The smaller primer and associated smaller flash hole permit higher pressure loads which means higher velocity.
These work fine.
The process is tedious and I wish there were SRP 243 brass. I've never seen any.

Always used Lapua Palma Brass had no issues until they weren't able to supply it. I found Peterson .308 SRP had no issues order 500 cases came in very quickly, and in nice ammo boxes that I could use after loading a nice add on feature that not found much these days. I would have like the overall length to have been a few thousand longer, but it all worked out Giraud Power Trimmer was able to trim off a thousand and still get a good ID and OD chamfer. I ordered a second 500 cases in less than two weeks from the first order and was able to get the same lot order. I also use a little less powder and achieve the same results. I think the brass is GREAT. I haven't used my AMP Annealing yet, but the Peterson brass program is in there and I believe it will work great. Thank you, Peterson/Graf and Son's. Yes, I, am done with Lapua.

Test
308 R700 20" barrel 1 x 10 twist
N150 powder @ xx.x grain
155 HPBT Palma 2.80" COAL
CCI #41 primer
Averaged 2550 FPS - similar to Lapua brass results
Great grouping @ 100 yds
1st time use - very happy

Very nice. Similar to Lapua SRP.

I’ve bought Peterson brass twice now from Graf and Sons and each order was shipped to me very quickly. Instead of having the brass all arriving lumped together in a cardboard box, the Peterson .308 SRP brass comes shipped in it’s own plastic ammo box keeping each piece of brass separated from the other, no dented bodies or deformed case mouths to contend with like some other brands. I inspected, weighed and measured each case, the lot was very consistent, and for me I can load and fireform each case as is without having to do any work to them. Made in the USA. I would buy these again in the future.

Very consistent weight and length of trim

I found this brass to be very uniform, consistent and of a quality that rivals the Lapua brass that I have been using... The on paper results tell the story... several 10 shot groups under 0.5" at 100 yards..

very nice brass and packaged. quality of the brass was spot on. Annealed and ready to prime. brass came in resized already but I went ahead resize just to be sure. seating the bullets was smooth as butter. I will be ordering more .308 win srp brass in the future. I will be waiting for my 6.5 Creedmoor brass. Peterson's brass as well.

Good quality brass, started load testing and results are very consistent, looking forward to see the performance once the brass has been fireformed. The packaging is great.

if you read the reviews and tests on line or try it, you realize Peterson is going after the old-school big boys. The packing alone makes it worth it.

Top tier quality! Highly recommended, will buy again!
Super fast shipping!

Excellent brass. I bought 50 pcs of 308 win SRP to try and the brass showed up in excellent shape. It also came in a free hard plastic ammo case which was a welcome sight. I'll buy more when needed.

I purchased Peterson Brass cartridges in the .308 variation. I am very pleased with the uniformity and consistency in build and quality. A well made American product. It compares to the Lapua Brass that I have. I will definitely buy again.

I was looking for small rifle 308 brass. It came shipped in a mtm case. Keeping the brass protected. My groups shrank by .50. Good brass

This is the nicest brass I have ever purchased. This brass is so exact. I marked and then checked my loaded rounds. I could identify them by the incremental charge increase on my stepped loads. 1 grain steps loaded with 178gr Hornady ELD match they were within .01 of a grain.

The uniformity of the Peterson brass is really good. I sorted the new brass by weight but the differences between the entire lot were negligible. Great packaging. Great service from Graf & Sons. I will update with results as I develop loads with 168gr match bullets.

As always another great product from Peterson Cartridge.
As for Graf & Sons.... They are an AWESOME COMPANY. Had The Item on Notification and when it came available I got an E-mail right away. Thank you so very much

Waited long time for this brass to come in stock and very anxious to try it out. Now just to get weather to cooperate and I'll be in business!

I’m not sure you’ll find a better option for reloading honestly. I love how they package the brass up into an actual ammunition box to use for the ammo you load.

My dies don't have any large diameter decap pins. Using stick powder and the over stock of small primers I have instead of the not so stocked up large primers in my stash. They work fine and like buying Peterson company products. I admit I like the box they come in

The quality control and packaging on this product is incredible. It looks and feels better than Lapua brass. Developed some loads with 168 hornady BTHP and IMR 4064, super accurate and the brass holds up strong

Was really happy to find some of this brass in stock. Uniformity is on point. Even comes in an ammo box. This was my first time purchasing Peterson brass and I can guarantee it will not be my last.

Been waiting a long time to try this brass out! I could never find it in stock anywhere I was looking for it? Someone told me to check Grafs? Lucky me, got this brass in & started checking it out the consistency in each case is as good as higher priced brass! I’m sold on Peterson Brass & looking for it in all of my rifle calibers now!

Good stuff but they do have small flash holes so you need a smaller decapping pin.

Great brass and great package

Super nice brass and packaging