Prvi 22-250 Remington Brass Bag of 50

Great!

The brass works great.

This is the first time I purchased this brass and I am very impressed with it !!!! I will be buying more in the future!!!!!💯👍

This brass arrived in good condition. Looking it over this is great brass for the money. This caliber of brass was hard to find was happy I finally found it at Grafs.

Great price and a very decent product. I checked dozens of them with a gauge and found them to be completely consistent. They load nicely and chamber properly. I’ll buy these again.

First time ordering this item. Arrived quickly. Count was accurate,only had 2 dented necks, but easily remedied. I did have to discard one case due to a split shoulder. After sizing, case length measured nominal to just under. Annealing appeared to be good. Flash holes a bit more burred than others I have used, but again, easily fixed. Holes were well centered. Will load and see how they perform. I feel they are worth giving a try, considering the cost difference compared to others. Overall pleased with this purchase.

Have used Privi brass for many years ,very consistent in weight and quality . No issues with the brass , I only neck size and can get 3-4 re loadings before needing to trim ..Great product and super fast shipping from Grafs !!

This is solid brass, it is consistent and will get the job done. I use mine with a 69 grain Sierra MatchKing on top of some H-4350. Near max load didn’t see any pressure signs. I will buy more brass.

I received the brass quickly as usual with grafs. The brass seems to be good brass and not near as pricey as some of the others. I'll be using it to work up loads for 2 different bolt guns so now I just got to order some more

Received the brass much faster than I thought I would. I bought 150 and it all came in at an OAL of 1.902" +/- 0.001" which was a little shorter than my standard 1.906 for the 22-250 but it'll stretch out after a firing or two. Very few burrs and necks were in good shape. Will buy PPU again.

ppu brass is great! i prefer it to several other kinds of brass, and it is often avail in calibers not avail elsewhere

Needed new brass to replace Federal and Winchester brass. Have only processed it and found it to be pretty good. More burrs on the flash hole than I usually see but that can be cleaned up.

Brass came in good shape. Bright and shiny.

I think for these brass is great stuff I’ve never had any issues with it whatsoever. Shipping was also fast.

Lasts a lot longer than others, highly recomended

for long lasting and good quality brass I like PPU, I also am very thankful they produce brass in uncommon and not so easy to find calibers at a reasonable cost

Received earlier than thought. Looks like very good brass at a good price. Recommend!!

Excellent Brass and very high quality. Will definitely buy more!

This brass seems to be very good quality so far and the availability and price is hard to beat. I have also purchased 8x57mm Mauser and 7.65x53mm Argentine Mauser Prvi Partizan brass and have been happy with both of those calibers as well.
Graf & Sons continue to be very fair in pricing, keep very good stock of products and very fast shipping!
Thank you Grafs...

This is great brass as always and grafs is the place to get your reloading supplies.

Great brass for reforming into 250 Savage.

I have been using Prvi Partizan brass for a while now. I reload it for hunting purposes mostly and have had no problems. This is great brass.

Brass arrived boxed by expert warehouseman , each brass order in seperate box with internal packing, no dents or dings in any batches , no split necks , etc. Use in metallic shooting with 70 to 80 % load data , depending on powder available, older examples have 15 FL reloadings with no signs of any problems after inspections , very happy with product , price.

Very good Brass, uniform size and weight from casing to casing. Highly recommended!

Great quality at a great price! I've loaded (and fired) 100 pieces three times, and the brass is holding up great. Primers are still seating well and accuracy remains consistent. This brass is hard to beat for the price.

love this brass, I'm not fanatic like most that weight and concentric measures everything!! I load it with my favorite accuracy recipe and they work. Can't beat the price. They just went up now? BUTT still great value and quality product.

cant beat the price. Loads were accurate but i did separate by weight.. good quality and i feel as good as Win or Rem stuff.

Really nice Brass . They must come really close to specs,
Sized verily easily with just a little lube . My EtronX Rifle thanks you .

I have not used PP brass in the past, but when I saw them listed at a great price, I decided to give them a shot. I have not loaded and shot any of them yet, but here are my first impressions:

1. Exterior of the brass seems to be very good; no tarnish, marks, dents, etc.

2. The flash holes look to be very uniform, and appear to be drilled rather than punched. That's a plus.

3. I did size and prime a few of them. No problems with either. Primer pockets are maybe a little tighter than other commercial brass, but I had no problems seating primers with my Frankford Arsenal hand primer.

4. Unless there are problems lurking that are not readily apparent, this seems to be excellent brass for the average (ie. non-competition) reloader.

Excellent product will buy more.

I decided to try the PPU Brass in .22-250 due to a great sale price & prior reviews. As stated by others, my brass arrived with minimal damage to necks or case body. Appears uniform, primer pockets seemed tight, not as tight as Lapua, but 1/3 the price. Some small variance in neck tension/wall thickness, but again not terrible. I believe this will be better base brass than W,R or H brand brass. Not up to Peterson or Lapua quality - but again a bargain at the price I paid at Graf's.

Don't overlook PPU it is quality brass! I will definitely be ordering more.