Prvi 25-06 Remington Brass Bag of 50

Very good brass at a reasonable price. The flash holes needed uniforming, but I would have done that on any brass.

Ordering as usual was a good experience, shipping was fast. I haven’t used the brass yet because I ordered it to replace the brass I’m using now, as soon as I shoot up the loaded brass, I’ll replace it with this. The PP brass came indented, clean and appeared ready to load and appeared to already have been annealed but I like to anneal all my new brass to make sure and trim it to size to have it ready when it is time to load it. The brass was very close to the recommended length because there wasvery little metal trimmed off which was nice. I have used this brass before smd have always been happy with it. If you want a good ordering experience order from Graf &Sons, if you want good brass get the PPV brass.

Brass looks good but is a little on the soft side. Flat base bullets push the side of the neck out on one side as they seat and leave the bullet loose. Crimp die fixes some of it.

SEEMS TO BE GOOD BRASS. SHOT SOME GOOD GROUPS WITH 1st LOADING

I have never used PPU, but I am sold. Very pleased with the quality.

Good for hunting, sizes well but the flash holes need to be opened up with a flash hole uniformer.

I will echo what others have said. It appears to be quality brass, in spec for length, easily sized. The only thing I noticed is that the flash holes appear to be slightly undersized when I prepped the brass, but not significantly.

Have bought 100 cases of P P U brass . Have checked only 20 of them and seem ok . Wall thickness isn't on par with lapua, or noslar . But you can't even find these nor Sierra match kings
Couple of firing will tell

Out of the package the lengths were mostly even, but the flash holes had a lot burs in them. I trimmed all to the same minimum trim length in order to use the Lyman flash hole de-burring tool to fix this problem. All flash holes appeared to be centered, and well sized. Cases seemed to be very uniform other than this problem. For the cost compared to the only other available 25-06 brass available the work was worth it for the results. I would buy this again.

Purchased to resize and fireform 257 Roberts brass. No issues at all.
All of my rifles are sub 1/2" shooters. I've had problems with the so called high end brass that costs more than twice what PPU costs.
I changed a couple of rifles over to PPU brass and the groups are every bit as good as with "quality" brass.
I also push the envelope with stretching max loads and have no problem with loose primer pockets as I've had with other brass in the past.

I bought it to resize to 6.5-06 and it has worked fine so far. After uniforming primer pockets and flash holes. I’m hopeful.

Great quality brass. Used it for my 25-06 pest loads. Will order more.

The .25-'06 PPU brass lived up to the high standards I have come to expect from PPU products. I was happy to find it available in this time of shortages.

Loaded with 100 gr. In the 25/06. Shot great, and am on the 4th loading. All is looking great so far.

If you're a reloader you know the problems we've had finding new brass. And the past year SCAMMERS are everywhere on the Internet claiming to have the product. I researched Graf and Sons to find a 100% solid rating for decades out of the Midwest. No one else has had 25-06 brass the past year. I was uncertain about the company PPU brass to find out they have been making brass for a long time. Even being bombed out several times during WWII it didn't stop them. My advice is to buy now because the price will go up. Serbia brass gets high recommendations on the Internet.