Prvi 30-06 Springfield Brass Bag of 50

I've had good luck with PPU 8mm brass through my K98; looking forward to the same results through my .30-06.

So this is my second batch of PPU 30-06 brass. it Is good Brass, lasts over multiple reloadings. I also have used PPU Brass in multiple other calibers. Do not hesitate to use this brass.

I bought these for forming into 7.7 Jap. I use the Lee dies, so 1st chambering is often tight, but these hold up awhile.

Very good brass at a reasonable price! I would recommend it to anyone.

I would put this brass above Most production brass Save Peterson and Lapua..

Great price.

Good brass.

I recently purchased Prvi Partizan from Grafs, and I couldn’t be happier. Their website was user-friendly, making it easy to find what I needed. The checkout process was smooth, and I received my order promptly. The brass and other items arrived in excellent condition, exactly as described on their website. Very pleased with the quality and will continue to shop Grafs for my shooting supplies

Needed brass this was available at a great price and grafs never disappoints with shipping and quality of products , great job Grafs….. well done!!!!

Great product for hand loading, performance is flawless. I have gotten 6 reloads from these so far and hopefully 4 to 6 more

I have always been happy with PPU brass. Very consistent and moderate neck tension. Other brands have a death grip on the bullet that causes me problems. I'll keep buying this as fast as they can make it.

I have used this brass in several calibers, and have always had outstanding results. As with any new brass, I always run it through the press first to take care of any small dings. Loads great, works great, great price!!!!

I haven't had a chance to try the .30-06 brass yet. I already use the PPU brass in 9.3x62 Mauser and they are very good, especially for the price. I expect that the .30-06 brass from PPU is as good as the other I already use.

Good quality and a great value. Would buy again.

I would recommend this brass for plinking or hunting ammo. This is good brass for the price, but I had to full length resize the new brass due to inconsistent neck tension. I measured each piece of new brass and found that the length varied by 0.008" (avg = 2.486"), H2O capacity varied by 1 grain (avg = 69.72 gr), and only one case didn't fit the chamber (shoulder needed to be pushed back). So I did my full case prep process to bring all of the brass back to zero (F/L resize, trim, chamfer/deburr, etc.).

Great brass and price for loading the M1 Garand

Arrived promptly, worked perfectly, no de-crimp required, no need to trim on first use.. Delighted, after struggling with crimped used military brass and its problems. What more is there to say?

Brass arrived in very good condition. Packing could have withstood a direct hit with an A bomb.
These are annealed.
Necks are quite round. Near perfect unless you look hard.
On my comparator, they are ALL within 2.041.5 to 2.042.
Not shabby.
Wish I had a way to check concentricity.
I'd be willing to put this up against most any other brass.

The prvi partizan brass is good quality brass and has worked well for me. Just trim to length and load like normal. Shoots great!

Fast shipping and good pricing for these lean times.Primer pockets uniform. Only 1-2 pieces per bag that had necks slightly out of round. Ran all through neck sizer and they were good to go. Fifty grains of IMR 4895 with a Prvi Partisan 150 gr FMJ flat base bullet and my 1943 Garand was shooting fine.

Loaded this brass for a customer and he loved it. Once again thanks for a great product and good pricing.

Its perfect clean chamber great in my M1

no dents price is great will order more

PPU Brass is great.
For my money it is all I buy when ever I can.
Price and quality can not be beat.

great product good price

Nice brass at a good price, got for use in M1 Garand and 03A3.

I love this brass it works easily and is really clean I will be buying more

I used this brass in my Garand, and I like it better than what I had been using. It’s clean, no dents, brand new brass. Will be buying more.

This brass is awesome it shipped fast and was in perfect condition. For the money it is hard to bet and as hell better then range brass. Folks here are complaining that they received their brass in poor condition with dents on some of the case necks and body well read in the description where there is a disclaimer that states just that. My brass was in perfect condition and for those giving it a poor review then go and try to find a better price someplace else or better yet just go out and spend hours picking up 30-06 brass which will be in far worse condition. With that said primer pockets took new primers with ease and loaded and fired perfectly will a lot more soon!

I have been using PPU brass for several years and never had any issue but the last batch I ordered had very bad dents and some were so back I could not use them

This brass I received was badly dented & only 49 was in the bag! Just not the necks but a few of the bodies were dented! I bought this brass from you before & never had this problem! This normally is very good brass! It's not worth the effort to return, will not buy it again!

Really good brass. The first time I can across this brass was at my local range. The guy next to me wasn’t picking up his brass,so I asked him if I could have his. All of it was PPU head stamped. It all reloaded well and I’ve been using it when ever I can get my hands on them.

I have used Winchester, Remington, LC, HXP Hornady, Federal. For the price PPU is as good as any of them.