Prvi 6.5x52mm Carcano (6.5x52mm Mannlicher-Carcano) Brass Bag of 50

This is wonderful brass for reloading and it works perfect paired with PPU bullets. Graf & Sons has the best customer service and their shipping is always quick and well packaged. Thanks so much Graf & Sons!

Loaded with .268 PPU bullets - Works great! The ppu bullets seem to vary and average around .267. Currently working up a more accurate load!

I use Hornady .164 sp rounds with this brass and it works flawlessly, You just need to size the brass first.

I use Prvi Brass for a lot of different calibers from 222 Remington to 45-70 Government and have never had a problem.

Good stuff.

PPU 6.5 is factory loaded with .264, so I buy these and just load my own from the start. They loaded .268 jacketed rounds right from the bag, with no issues. To load cast, I had to expand the mouth a touch. I haven't worn these out yet, but I do get about 5 or more loadings from PPU brass. I'd like to see them reproduce the clips for these.

Great Brass. Measured all dimensions and they were correct. I loaded them using Lee dies and shell holder. All worked out fine. Bullet seated tightly. I'm very happy with them.

Brass appears to be good quality. The rim dimension is correct to hold into, and feed properly from the six round en bloc clips.

Received this 6.5 Carcano brass. Very happy to see it was properly tempered. Arrivved in excellent condition fast shipping.

These arrived promptly and loaded nicely. I used the .268 bullets and they shot great out of my Cavalry Carbine. PPU makes good components.

PPU brass is the only way to go when loading for Carcano rifles. Along with great service from Graf &Sons, it just doesn't get any better!

I have loaded and reloaded this brass several times with no issues. I had LEE dies make me a .268 expander at nominal cost for their .264 die set and used the Privi .268 bullets with excellent accuracy. Barrel slugged at .268. Highly recommended.

I looked a long time to get the correct brass for my several old Carcano rifles. Graf's is the only one to have it now. Nice brass, clearly made by a company familiar with military rifle ammunition.

Shell casings had a near perfect spec and shot very well through my Carcano. Ran 129gr bullet with light powder load.

The PRVI case rim is perfect for the cavalry extractor dimensions- Thin
The NORMA case has a larger rim thickness requiring some fussing with the fit into the extractor. Like the PRVI.

Grafs wide diversity of offerings delivered again.

As new ammo is expensive or hard to find, I added 6.5x52 to my reloading line up. I knew I could find it here.

Prvi Partizan brass is always of great quality and as always, delivery was no issue.

Sized five brass with no issues. Looking forward to reloading 40 rounds to test and evaluate
.

I have been looking at this brass and comparing it to hornady brass and I have to say for the money this is the way to go

Loaded with no issue. High quality brass.

brass works good

Graf&Sons is always my go to for less common/ difficult to find items. I am never disappointed. Quick shipping, fair pricing, and easy flat rate shipping. This is another example. This 6.5x52 Carcano brass is not the easiest to find, especially at a decent price. I use PPU brass in several calibers, as they are the only ones that make many of the more obscure calibers. It always performs well and I have never had any issues. Hope they keep makings the obscure calibers, because if they ever stop supply will be very difficult and very expensive to find.

brass worked good for me price is good on the brass plan on loading light loads hoping to get many reloads out of this brass

Loaded up ok ,Privi Partizan always works good.

Will load cases later. Sure it will work just need holder.

This PPU Brass is perfect for reloading 6.5 x 52 Carcano.
I am using a Hornady .268 die set & the fit is perfect with
my PPU .268 bullets. The brass is clean & primer pockets are the correct width & depth.

good brass, reloads good. i used the hornady 0.268 die set.

As always, Prvi is my go-to brass for European calibers. Was not disappointed. As others have stated, the rim is thin (as it is supposed to be) and the Lee #2 shell holder is a little loose. Use either an RCBS or Hornady shell holder for better results.

Great quality brass. Will resize and load 👍

These cases were perfect right out of the bag.
Full length sized them and seated a 123grain projectile on them, excellent accuracy from 2 Carcano Cavalry rifles. This brass is a must if you load for these Italian beauties.

This is good brass but, its not 0.268, all of mine was 0.264. I have all the die tools to make it 0.268 so its no big issue but required effort is a bit more to bump it up to 0.2675.

Anyway, its top quality stuff and feeds perfect and then ejects as it should, its just not 0.268 until you make it that.

Also: NO stuck cases with the Dillon Lanolin Lube. That's been my go to for years now.

4 star due to the small size issue. Otherwise its a 5 for function in my firearm after making the finished product go bang.

One big difference with the Prvi bass for the 6.5 Carcano is the proper sized extractor groove. This really helps both closing the bolt and extracting spent brass. Such as simple thing to get right and allow more fun shooting instead of spending range time removing a stuck case!