TIPTON NOPE ROPE 22 cal PULL THROUGH BORE CLEANER

I would have given this a 5 star except it would not pass thru my 5.56 (.224 bore) AR rifle barrel. I could not get the Nope Rope past the chamber and had to pull really hard to back the Nope Rope out of the barrel.
It works just fine with my 6mm's (.243 bore). The Nope rope has a swivel threaded connector that allows continued pulling thru bore without dropping the 48 inch weighted pull cord thru bore for each pass. A finger loop at the end of the Nope Rope is for pulling the Rope back out of the barrel should a complete pull thru not wanted. A copper brush is part of the rope. The braided rope is 26 inches long. The 2 copper brush portions are located 6 inches from front end and are 2 inches long. The braided rope when pressed flat is 1/2 inch wide. It would not pass thru a .224 inch bore. It worked great thru a .243 bore. I sprayed some Hoppe's Black gun solvent on the copper brush portion and made 4 continued passes thru my .243 bore with good results. The nylon rope can be cleaned up with laundry detergent. Expect some false copper fouling indication caused by the copper brush. Not for a .224 bore - too fat, the leading end measures .27 inches upon mild compression and can be pulled into a .243 bore with moderate force. .