RCBS MOULD 44-250-K 2-CAVITY (.430)

RCBS MOULD 44-250-K 2-CAVITY (.430)

$165.99
Skip to product information
RCBS MOULD 44-250-K 2-CAVITY (.430)
  • RCBS MOULD 44-250-K 2-CAVITY (.430)
RCBS MOULD 44-250-K 2-CAVITY (.430)

RCBS MOULD 44-250-K 2-CAVITY (.430)

(SKU:RCBS82080)
MPN: 82080
$165.99
In stock

Quantity:

RCBS takes bullet casting seriously! They ensure all of their mould blocks are precision ground square before any machining. They utilize steel alignment pins to ensure perfect mating of mould blocks even after years of heavy use. All RCBS mould blocks feature a 3/16" thick solid steel sprue plate held tightly in place with tempered steel spring washers and screws. Mould handles are not included and must be purchased separately.

  • Precision Ground Square before machining
  • Steel alignment pins to ensure perfect mating between blocks
  • 3/16″ Thick Solid Steel Sprue Plate
  • Machined from Solid Cast Iron Blocks
  • Mould Handles not included - Sold Separately
  • 44 Caliber
  • 250 Grain Keith Type

RCBS #421 Top Punch Recommended, Sold Separately.

Warning

Melting and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm. For more information go to - www.P65Warnings.ca.gov.See instructions on Reducing Exposure supplied with product.

Similar Products
  • 5 stars: 3 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
J
John A.
Rcbs molds are TOPS!!

This RCBS mold is no different than any of the other RCBS molds that I have, and that is PERFECT!! I’ve never had an issue with my RCBS molds…..which is more than I can say about the More expensive brand that starts with a S and ends with an O….but I digress.
This 44 Keith mold drops perfect bullets once heated and cycled and it keeps dropping them perfect, key is use at least 2 steel molds to keep them from over heating and to keep a good cadence going. I mainly use this bullet for my 44 Magnum Henry and Rossi, so due to length limitations I use it in 44 special cases for a nice accurate easy shooting load that has respectable energy coming out a 16” barrel.
No complaints from any of my RCBS molds, I do believe they are still U.S. made and I recommend them to anyone. Just another reminder for Lever Gun shooters, this bullet is too long for 44 magnum loadings to have reliable cycling. But it makes a beautiful 44 special load!

B
Brenton T.
RCBS .44-250-K mold Great Experience

I have been loading the .44 Kieth style bullet for a while now. I have had an awesome experience with this steel mold vs aluminum ones. Out of my 8 3/8 model 29-3 it is by far the most accurate target bullet i have had the pleasure of shooting. Loaded just a hair under full house magnum loads, it consistantly produces 1" groups at 50 yds. I routinely plink at 100yds just for kicks. Thank you Elmer and RCBS for this time proven design. SHIPPING WAS FAST, MOLD DROPS CLEAN! No complaints whatsoever.

G
George K.
RCBS .44-250K is awesome!

Reading many posts on several forums, the "#1 Go-to" mould with nothing but kudos was this -- the RCBS .44-250. I received mine VERY quickly from Graf's, and did no more than wash it with some Dawn using an old toothbrush. The third drop was ~OK -- with #4, on, being perfectly filled bullets -- no wrinkles, frosting, or any other defects. (I use a RCBS Pro-melt; alloy is WW + a bit of tin) My only regret is my not having bought this as my "first" .44 Sp/Mag mould.
geo

Share: